Cleanse-oil has developed a range of particulate removal devices that remove at least 5 off ISO codes of particulates in an oil in a single pass.

The particulate removal device does not shear the oil as it passes through it, like conventional hydraulic filters do in order to function and as a result does not strip out any of the additives or change’s the oils base stock. By the very nature of the particulate removals device’s engineering particulates to the rated size are removed but also particulates smaller than the rated size making these units extremely effective and offering exceptional value for money as they perform better than the indicated size rating.

we have included more information in the technical and info page, there is a document that was produced after much research and testing by SKF bearings.  As you see from the article the better the quality and lower the number of particulates in the oil at the very start has a significant effect on the equipment or vehicle. This the reason behind our new oil transfer machine, off line filtration systems. If you do not introduced oil with particulates for the lubrication/power the equipment or vehicle this is going to benefit hugely in the long term. Below are the results obtained from a recent particulate count test we made on customers oil and using our particulate removal device. We were also asked to test oil that was passed through our units for 1 hour. The results we quite staggering to the point where there was no results to publish but we did see at this level of filtration we were getting contamination from the air as we filled the test bottle with oil and the particulates already present in the bottle before filling that we were unable to remove with cleaning.